contacts copper alloy plating contact area : gold over nickel terminals : tin lead (2 min) moldings thermoplastic ul 94v-0 rated card detection switch copper alloy number of contacts 8 mechanical life 10,000 cycles min card insertion force 10 n max card extraction force 1 n min / 10n max contact force 0.20 n min / 0.60 n max vibration frequency 10 to 500 hz. acceleration 50m/s 2 duration 6 hours - amplitude 0.35 mm (0.014) max electrical discontinuity 1? shock peak value 500 m/s 2 ?duration 11 ms 3 shocks in each direction of each axis max electrical discontinuity 1 ? insulation resistance 1,000 m ? min resistance 100 m ? max current rating 10 ? min / 1 a max dielectric strength 750 vrms min card detection switch normally closed contact resistance 100 m ? max dielectric strength 250 vrms min current rating 1 ma min /10 ma max maximum power 0.2 va operating temperature -40? to +85? soldering temperature wave : 260? / 5 sec damp heat iec 512 test number 11c (10 days) salt mist iec 512 test number 11f (96 hours) card detection switch not sealed blade switch 20 per tray, 10 trays per box. 6 dimensions are shown in mm dimensions subject to change www.ittcannon.com ccm01 mk i ccm01 mk i connectors have ?ed contacts and a blade card detection switch unsealed. these connectors are intended for applications where the card usage is relatively low and the environment is benign. features available with 8 through hole contacts. a normally closed blade switch detects when the card is fully inserted. snap in boardlocks hold the connec- tor in place prior to soldering. part number number of contacts packaging multiple CCM01-1NF 8 200 contact electrical data switch electrical data environmental data construction mechanical data ordering code packaging
7 dimensions are shown in mm dimensions subject to change www.ittcannon.com ccm01 mk i dimensional drawings pcb layout CCM01-1NF CCM01-1NF a a 54,3 58 0,6 0,3 a b 22,08 10 10 20 15,4 card stop 3,2 19,05 19,05 12,7 62 0,2 6,5 2,0 4,0 1 4,8 0,2 40 3,65 0,3 card entry 6,5 0,25 0,9 3,81 3x 2,54 (ref.) 62 (ref.) 40 (ref.) 50,3 10x embossed channel card insertion direction 4 snap feet pick and place area ? 13 a-a card stop b a 0 20 0 10 10 2 0 22,08 24,62 27,16 29,7 58 ? 3,2 +0,1 0 ? 0,1 3,81 3,81 19,05 19,05 9,38 33,51 ? 1 +0,1 0 ? 0,1 c2 c3 c4 sw sw c5 c6 c7 c8 4x 10x (component side) c1 card end travel switch terminal contact location according to iso 7816-2 plastic outline unless otherwise stated, tolerances are 0,10 mm
|
